TOMZN 4 Pole 3Phase Adjustable Over And Under Voltage Protector-TOVPD3-VA
TOMZN 4 Pole 3Phase Voltage Protector Features
-
Adjustable Over‑Voltage Protection — Cuts power when phase voltage exceeds the set safe level to protect equipment from high‑voltage damage.
-
Adjustable Under‑Voltage Protection — Disconnects supply if phase voltage drops below the set threshold to avoid brown‑out damage.
-
Over‑Current Protection — Protects circuits from over‑current conditions with adjustable current limits.
-
Three‑Phase Balance & Asymmetry Protection — Detects phase imbalance (asymmetry) and trips to prevent damage to motors and other loads.
-
Phase Sequence Protection — Ensures correct phase order and prevents reversal faults that can damage three‑phase equipment.
-
Adjustable Timing Controls — Active time, reconnect delay, and power‑on delay are adjustable to fine‑tune protection response.
-
Manual Voltage & Current Calibration — Allows precise calibration of measurement ranges to match specific system requirements.
-
DIN‑Rail Mountable Design — Standard 35 mm DIN‑rail installation for easy panel mounting.
-
Wide Use Cases — Suitable for industrial, commercial, and residential three‑phase systems to protect motors, compressors, HVAC units, and other loads.
₨ 6,399 ₨ 7,999
TOMZN 4 Pole 3Phase Adjustable Over And Under Voltage Protector-TOVPD3-VA
The TOMZN TOVPD3‑VA 4‑Pole 3‑Phase Adjustable Voltage Protector is a DIN‑rail mounted safety relay designed to protect three‑phase electrical systems from common power quality issues. It continuously monitors all three phases and provides adjustable over‑voltage and under‑voltage protection, helping prevent damage to motors, compressors, HVAC units, and other critical equipment. In addition to voltage protection, the device includes over‑current protection, phase sequence and phase imbalance (asymmetry) detection, and adjustable delay settings for power‑off and reconnection timing, giving you precise control over protection behavior. Built for industrial, commercial, and residential three‑phase applications, it helps maintain stable and safe power delivery to your electrical loads.
| Specification | Details |
|---|---|
| Model / Type | TOMZN TOVPD3‑VA / TOVPD3‑63VA Three‑Phase Voltage & Current Protector |
| Pole Configuration | 4‑Pole (3 Phase + Neutral) |
| Rated Voltage | AC 3×220V / 3×230V / 3×380V depending on variant |
| Rated Frequency | 50 Hz / 60 Hz |
| Rated Load Current | 63 A (typical) |
| Over‑Voltage Protection Range | Adjustable ~230 V – 300 V |
| Over‑Voltage Recovery Range | ~220 V – 295 V |
| Under‑Voltage Protection Range | Adjustable ~140 V – 210 V |
| Under‑Voltage Recovery Range | ~145 V – 215 V |
| Over‑Current Protection Range | 3 A – 63 A |
| Active (Trip) Delay | 0.1 s – 30 s (adjustable) |
| Reconnect Delay Time | 1 s – 500 s (adjustable) |
| Power‑On Delay Time | 1 s – 500 s (adjustable) |
| Phase Sequence Protection | Yes (ON/OFF control) |
| Phase Imbalance (Asymmetry) Protection | Yes (adjustable asymmetry trip) |
| Voltage & Current Calibration | Manual adjustment ±9.5 % |
| Display (Optional) | Interactive Digital Voltage/Current Display (varies by model) |
| Mounting Type | 35 mm DIN‑Rail |
| Application | Industrial, Commercial & Residential Three‑Phase Systems Protection |
Based on 0 reviews
Be the first to review “TOMZN 4 Pole 3Phase Adjustable Over And Under Voltage Protector-TOVPD3-VA”
Related products
-
Ac/dc Breakers, Solar Accessories
TOMZN 2P+2P MTS DC Dual Power Circuit Breaker For PV System
TOMZN 2P+2P DC MTS Breaker Features
-
2P + 2P DC Manual Transfer Switch (MTS) – Lets you manually switch between two DC power sources in a photovoltaic (PV) setup, such as a solar array and a backup battery bank.
-
Dual Power Operation – Designed for DC dual power systems to ensure continuity of power without automatic switching.
-
Rated for High DC Voltage: Supports up to 1000 V DC, meeting common PV system requirements.
-
Integrated Circuit Breaker Protection: Combines manual transfer switching with overload and short‑circuit protection in one unit.
-
2P + 2P Pole Structure: Provides full protection and switching for two separate DC sources (each 2‑pole).
-
Rated Current Options: Available (commonly) at 63 A and potentially other ratings depending on model.
-
DIN‑Rail Mountable: Compact design fits standard 35 mm DIN rails in PV combiner boxes and DC distribution panels.
SKU: n/a -
-
Ac/dc Breakers, Solar Accessories
TOMZN WiFi Smart Switch Energy Meter Circuit Breaker-TOB9-VAP
TOMZN WiFi Smart Switch Circuit Breaker Features
-
Smart WiFi Control – Remotely turn the breaker ON/OFF from anywhere using the Smart Life / Tuya app on your phone.
-
Energy Monitoring (kWh) – Measures and reports real-time energy usage, including voltage, current, and power, so you can track consumption and manage bills.
-
Scheduling & Timer Functions – Create timers, schedules, and loop timers for automatic circuit control.
-
Built-In Protection – Offers over-voltage, under-voltage, and over-current protection settings to safeguard connected devices.
-
Wide Operating Range – Works with AC 90–300 V (50/60 Hz) supply and supports 63 A load capacity (adjustable).
-
Last State Memory – Remembers the previous ON/OFF status after a power outage.
-
Durable & Reliable – Designed for over 100,000 mechanical operations and –25 °C to +70 °C operating temperature.
-
Real-Time Voltage & Current Metering – Displays voltage, current, and power values in the app.
-
Voice Assistant Ready – Works with Google Assistant & Alexa via the Tuya/Smart Life platform (depending on app setup).
SKU: n/a -
-
Ac/dc Breakers, Solar Accessories
TOMZN 3 IN1 Adjustable Over & Under Voltage Protector with Kwh meter-TOVPD1-63VAE
Ac/dc Breakers, Solar AccessoriesTOMZN 3 IN1 Adjustable Over & Under Voltage Protector with Kwh meter-TOVPD1-63VAE
TOMZN 3 IN1 Voltage Protector Features
-
Adjustable Over-Voltage Protection – Cuts off power if voltage rises above your set safe level (e.g., 230–300 V range).
-
Adjustable Under-Voltage Protection – Disconnects supply when voltage falls below the safe limit (e.g., 140–210 V range).
-
Adjustable Over-Current Protection – Protects against excessive current with adjustable current range up to 63 A.
-
Real-Time Monitoring – Built-in voltage meter, ammeter, and energy (kWh) meter for live electrical data.
-
Delay & Reconnect Settings – Adjustable delay times before protection kicks in and automatic power reconnection after normal conditions return.
-
Memory of Fault Values – Saves recorded values for over-voltage, under-voltage, and over-current events even after power is off.
-
LED Indicators – Flashing LEDs show voltage or current protection status when triggered.
-
DIN-Rail Mountable – Fits easily into electrical panels using a standard DIN rail.
SKU: n/a -
-
Ac/dc Breakers, Solar Accessories
TOMZN 2P AC C Type MCB Circuit Breaker-TOB1-63H
TOMZN 2P AC MCB Breaker Features
-
2-Pole AC Circuit Breaker — Protects two lines in an AC electrical circuit.
-
Voltage Rating: Works at 230/400 V AC with 50/60 Hz frequency, suitable for standard power systems.
-
Current Ratings Available: From 6 A up to 63 A — choose based on your load requirement.
-
C-Type Trip Curve: Designed to trip on overloads and short circuits, and handle temporary current spikes (e.g., motors, lights).
-
Overload & Short-Circuit Protection: Automatically disconnects the circuit to prevent electrical damage and hazards.
-
Compact & Durable Design: Lightweight, built with fire-resistant and shock-resistant plastic, and easy to install on a DIN rail.
-
Standards Compliance: Meets international safety standards like IEC 60898 & IEC 60947 for reliable performance.
SKU: n/a -
There are no reviews yet.