Mora AC 2pole SPD Surge Protection Device (AES-2040) 40kA-385vAC
Mora AC 2pole SPD Features
-
2-Pole AC Surge Protection – Protects both live and neutral against voltage spikes on the AC mains.
-
High Surge Current Capacity – Can safely absorb and divert surge currents up to 40 kA to ground.
-
Nominal Discharge Current 20 kA – Handles frequent transient surges effectively.
-
Fast Response Time (< 25 ns) – Acts quickly to clamp dangerous voltage transients before they reach sensitive equipment.
-
Wide Voltage Compatibility – Rated for 385 V AC operating voltage and up to 415 V continuous.
-
DIN-Rail Mountable – Standard 35 mm DIN-rail installation for easy integration into distribution boards.
-
Robust Operating Range – Works reliably from -40 °C to 85 °C environmental temperature.
-
Heavy-Duty Wiring Support – Supports up to 35 mm² connection lines, suitable for larger conductors.
-
Protects Appliances & Electronics – Ideal for safeguarding household or commercial loads from lightning and switching surges.
₨ 2,599 ₨ 2,999
Mora AC 2pole SPD Surge Protection Device (AES-2040) 40kA-385vAC
The Mora AES-2040 AC 2-Pole 40 kA Surge Protection Device (SPD) is DIN-rail mounted surge protector designed to shield single-phase AC electrical systems from harmful voltage spikes and transient overvoltages caused by lightning strikes, switching events, or grid disturbances. It’s rated for 385 V AC operating voltage with a maximum continuous operating voltage of 415 V AC, and features a high discharge capacity (20 kA nominal, 40 kA peak) to divert surge energy away from sensitive equipment before it can cause damage. With a fast response time (< 25 ns) and broad operating temperature range (-40 °C to +85 °C), this SPD is built for durable, reliable protection in residential, commercial, and industrial distribution panels, helping to extend the life of appliances and electronic devices by preventing surge-related failures.
| Specification | Details |
|---|---|
| Model / Type | Mora AES-2040 AC 2-Pole Surge Protection Device (SPD) |
| Rated Operating Voltage (Un) | 385 V AC — suitable for single-phase AC mains systems |
| Maximum Continuous Operating Voltage (Uc) | 415 V AC — maximum voltage the SPD withstands continuously |
| Nominal Discharge Current (In) | 20 kA (8/20 µs) — typical surge current the unit handles repeatedly |
| Maximum Discharge Current (Imax) | 40 kA (8/20 µs) — peak surge current capacity |
| Response Time | < 25 ns — ultra-fast response to surges |
| Poles / Protection Mode | 2-Pole (L + N) — protects both live and neutral lines |
| Operating Temperature | -40 °C to +85 °C — wide environmental range |
| Maximum Connection Line | 35 mm² (hard or strand wire) |
| Recommended Connection Line | 16 mm² hard / 25 mm² strand wire |
| Mounting | DIN Rail (35 mm) — easy panel installation |
| Typical Application | Surge protection for single-phase AC electrical systems to safeguard appliances and circuits |
Based on 0 reviews
Be the first to review “Mora AC 2pole SPD Surge Protection Device (AES-2040) 40kA-385vAC”
Related products
-
Ac/dc Breakers, Solar Accessories
TOMZN 2P AC C Type MCB Circuit Breaker-TOB1-63H
TOMZN 2P AC MCB Breaker Features
-
2-Pole AC Circuit Breaker — Protects two lines in an AC electrical circuit.
-
Voltage Rating: Works at 230/400 V AC with 50/60 Hz frequency, suitable for standard power systems.
-
Current Ratings Available: From 6 A up to 63 A — choose based on your load requirement.
-
C-Type Trip Curve: Designed to trip on overloads and short circuits, and handle temporary current spikes (e.g., motors, lights).
-
Overload & Short-Circuit Protection: Automatically disconnects the circuit to prevent electrical damage and hazards.
-
Compact & Durable Design: Lightweight, built with fire-resistant and shock-resistant plastic, and easy to install on a DIN rail.
-
Standards Compliance: Meets international safety standards like IEC 60898 & IEC 60947 for reliable performance.
SKU: n/a -
-
Ac/dc Breakers, Solar Accessories
TOMZN 2P DC MCB Circuit Breaker 125A/100A-TOB1Z-125
TOMZN 2P DC MCB Breaker Features
-
2-Pole DC Circuit Breaker – Breaks both positive and negative lines in DC power systems for safer protection.
-
High DC Voltage Rating – Rated for up to 600 V DC (commonly used in solar PV and battery systems).
-
High Current Capacity – Available in up to 125 A rating for larger DC loads.
-
Overload & Short-Circuit Protection – Trips the circuit to prevent damage from excessive current or faults.
-
Modular DIN Rail Mounting – Easy installation on standard 35 mm DIN rails in DC combiner boxes and panels.
-
Compact & Durable Design – Built with strong materials for long service life in residential, commercial, and solar DC applications.
-
C-Type Trip Characteristic – Typical for general DC protection with reliable tripping behavior.
-
Suitable for Solar PV & Battery Systems – Ideal for protecting DC circuits between solar strings, inverters, and battery banks.
SKU: n/a -
-
Ac/dc Breakers, Solar Accessories
TOMZN 4 Pole 3Phase Adjustable Over And Under Voltage Protector-TOVPD3-VA
Ac/dc Breakers, Solar AccessoriesTOMZN 4 Pole 3Phase Adjustable Over And Under Voltage Protector-TOVPD3-VA
TOMZN 4 Pole 3Phase Voltage Protector Features
-
Adjustable Over‑Voltage Protection — Cuts power when phase voltage exceeds the set safe level to protect equipment from high‑voltage damage.
-
Adjustable Under‑Voltage Protection — Disconnects supply if phase voltage drops below the set threshold to avoid brown‑out damage.
-
Over‑Current Protection — Protects circuits from over‑current conditions with adjustable current limits.
-
Three‑Phase Balance & Asymmetry Protection — Detects phase imbalance (asymmetry) and trips to prevent damage to motors and other loads.
-
Phase Sequence Protection — Ensures correct phase order and prevents reversal faults that can damage three‑phase equipment.
-
Adjustable Timing Controls — Active time, reconnect delay, and power‑on delay are adjustable to fine‑tune protection response.
-
Manual Voltage & Current Calibration — Allows precise calibration of measurement ranges to match specific system requirements.
-
DIN‑Rail Mountable Design — Standard 35 mm DIN‑rail installation for easy panel mounting.
-
Wide Use Cases — Suitable for industrial, commercial, and residential three‑phase systems to protect motors, compressors, HVAC units, and other loads.
SKU: n/a -
-
Ac/dc Breakers, Solar Accessories
TOMZN 3P+3P MTS AC Dual Power Circuit Breaker MCB 50HZ/60HZ Change Over
Ac/dc Breakers, Solar AccessoriesTOMZN 3P+3P MTS AC Dual Power Circuit Breaker MCB 50HZ/60HZ Change Over
TOMZN 3P+3P AC MTS Features
-
3P + 3P Dual Power Manual Transfer Switch (MTS) – Lets you manually switch between two three-phase AC power sources (e.g., grid and generator/backup), ensuring continuous supply when one source fails.
-
Integrated Circuit Breaker (MCB) Protection – Combines transfer switch functionality with overload, short-circuit, under-voltage, and phase-loss protection in one unit for safer operation.
-
Three-Phase Compatibility (3P + 3P) – Designed for balanced switching of all three phases between two input sources, suitable for industrial, commercial, and large-load three-phase systems.
-
Wide Voltage & Frequency Support – Compatible with 230 V / 400 V AC and works on both 50 Hz and 60 Hz networks.
-
Manual Operation – User-controlled changeover without automation, giving direct control over which source is supplying power.
-
Wide Current Range – Available in various current ratings (e.g., 6 A up to 63 A), allowing selection based on load requirements.
-
High Breaking Capacity (~6 kA) – Built to safely interrupt fault currents and protect the circuit during overloads and short-circuit events.
-
DIN-Rail Mountable Design – Easy installation in electrical panels and distribution boards with standard DIN-rail mounting.
SKU: n/a -
There are no reviews yet.