Riayat – All things at your door step

Mora 125A 2‑Pole DC MCCB Breaker (Battery Breaker)

Mora 125A 2‑Pole DC MCCB Breaker (Battery Breaker)

2‑Pole DC Protection — Safely interrupts both positive and negative DC lines in battery and DC systems.

125 A Rated Current — Supports large battery banks and high‑current DC loads.

MCCB (Molded Case Circuit Breaker) — Robust protection against overload and short‑circuit faults.

High DC Breaking Capacity — Designed to handle the energy of DC arcs that aren’t self‑extinguishing.

Manual ON/OFF Isolation — Functions as a safe disconnect switch for maintenance or emergency.

Durable, Flame‑Retardant Build — Reliable long‑term performance in demanding environments.

Compact, Panel‑Friendly Design — Easy installation in battery racks, DC combiner boxes, or electrical panels.

Thermal‑Magnetic Trip Unit — Combines thermal overload and magnetic short‑circuit detection for dependable protection.

Ideal for Solar & Backup Systems — Excellent choice for solar PV battery circuits, UPS DC backs, and energy storage systems.

Mora DC 2pole SPD Surge Protection Device (AES-2040PV/1000) 40kA-1000vDC

Mora DC 2pole SPD Surge Protection Device (AES-2040PV/1000) 40kA-1000vDC

Mora AC 2pole SPD Features

2-Pole DC Protection — Protects both positive and negative DC lines in high-voltage systems.

High Surge Current Capacity — Handles up to 40 kA peak surge currents to safeguard equipment from powerful transients.

Nominal Discharge Rating — Capable of dealing with 20 kA regular surge events.

Fast Response Time — Reacts in < 25 ns to divert dangerous voltage spikes quickly.

1000 V DC Rated — Designed specifically for high-voltage DC systems like solar PV installations.

Wide Operating Temperature Range — Works reliably from -40 °C to +85 °C in varied conditions.

DIN-Rail Mountable — Easy installation on standard 35 mm DIN rails in DC distribution boxes.

Heavy Wiring Support — Supports up to 35 mm² connection lines for DC systems.

Ideal for PV Systems — Helps protect solar panels, inverters, charge controllers, and batteries from surge damage.

Mora AC 4pole SPD Surge Protection Device (AES-2040) 40kA

Mora AC 4pole SPD Surge Protection Device (AES-2040) 40kA

Mora AC 4pole SPD Features

4-Pole Protection — Protects all three phases plus neutral in AC mains systems.

High Surge Capacity — Handles up to 40 kA surge currents to protect equipment from powerful voltage spikes.

Nominal Discharge Current (20 kA) — Effectively absorbs regular transient surges.

Fast Response Time (< 25 ns) — Quickly reacts to surges before they can damage devices.

Wide Voltage Compatibility — Designed for 380–415 V AC systems in three-phase distribution.

DIN-Rail Mountable — Easy installation in electrical panels and distribution boards.

Robust Environmental Range — Operates reliably from -40 °C to +85 °C.

Heavy Duty Wiring Support — Accepts large conductors (up to 35 mm²).

Reliable Protection — Helps prevent damage from lightning strikes, switching surges, and transient overvoltage.

Mora AC 2pole SPD Surge Protection Device (AES-2040) 40kA-385vAC

Mora AC 2pole SPD Surge Protection Device (AES-2040) 40kA-385vAC

Mora AC 2pole SPD Features

2-Pole AC Surge Protection – Protects both live and neutral against voltage spikes on the AC mains.

High Surge Current Capacity – Can safely absorb and divert surge currents up to 40 kA to ground.

Nominal Discharge Current 20 kA – Handles frequent transient surges effectively.

Fast Response Time (< 25 ns) – Acts quickly to clamp dangerous voltage transients before they reach sensitive equipment.

Wide Voltage Compatibility – Rated for 385 V AC operating voltage and up to 415 V continuous.

DIN-Rail Mountable – Standard 35 mm DIN-rail installation for easy integration into distribution boards.

Robust Operating Range – Works reliably from -40 °C to 85 °C environmental temperature.

Heavy-Duty Wiring Support – Supports up to 35 mm² connection lines, suitable for larger conductors.

Protects Appliances & Electronics – Ideal for safeguarding household or commercial loads from lightning and switching surges.

Mora 4P DC MCB 1000 V 63A Circuit Breaker

Mora 4P DC MCB 1000 V 63A Circuit Breaker

Mora 4P DC MCB Breaker Features

4‑Pole DC Protection — Protects all four DC conductors in high‑voltage DC systems.

63 A Rated Current — Designed for moderate DC loads.

High DC Voltage Rating — Supports up to 1000 V DC, ideal for solar PV and battery systems.

Overload Protection — Trips when current exceeds safe limits.

Short‑Circuit Protection — Quickly interrupts dangerous fault currents.

Manual ON/OFF Switch — Easy isolation for maintenance or safety.

Compact & Durable Design — Built to withstand demanding DC environments.

DIN‑Rail / Panel Mountable — Easy installation in DC combiner boxes or panels.

Safe DC Arc Interruption — Engineered to safely break DC arcs that don’t self‑extinguish like AC.

Ideal for Renewable Systems — Perfect for solar PV arrays, battery banks, and DC distribution.

Mora 4P AC 63A MCB Circuit Breaker

Mora 4P AC 63A MCB Circuit Breaker

Mora 4P AC 63A MCB Breaker Features

4‑Pole Protection — Protects all three phases plus neutral in AC systems.

63 A Rated Current — Suitable for moderate three‑phase loads.

Overload Protection — Trips when current exceeds safe limits.

Short‑Circuit Protection — Quickly interrupts fault currents to prevent damage.

Thermal‑Magnetic Trip — Combines thermal and magnetic sensing for reliable protection.

Manual ON/OFF Operation — Easy switching and reset after faults.

DIN‑Rail Mountable — Fits standard distribution boards and control panels.

Compact & Durable Design — Space‑saving and built to last.

Wide AC Voltage Compatibility — Works with standard three‑phase supplies (e.g., 230/400 V AC).

Mora DC 1P 125A MCB Circuit Breaker For Battery/DC systems

Mora DC 1P 125A MCB Circuit Breaker For Battery/DC systems

Mora DC 1P 125A MCB Breaker Features

1‑Pole DC Protection — safeguards the positive DC line.

125 A Rating — supports large battery and DC systems.

Overload & Short-Circuit Protection — prevents damage to batteries, inverters, and wiring.

Manual ON/OFF Switch — easy isolation during maintenance.

Compact & Durable — fits panels and combiner boxes.

DIN‑Rail / Panel Mountable — convenient installation.

Safe DC Arc Interruption — designed for reliable DC fault protection.

Ideal for Solar & Battery Systems — perfect for PV, UPS, and energy storage.

Mora 1P AC MCB Circuit Breaker C Type 230/400V

Mora 1P AC MCB Circuit Breaker C Type 230/400V

Mora 1P AC MCB Breaker Features

Single‑Pole Protection – Protects one live conductor in 230 V / 400 V AC circuits.

C‑Type Tripping Curve – Trips at 5‑10× rated current, ideal for general loads like lighting and appliances with moderate inrush.

Overload Protection – Prevents damage by tripping when current exceeds the rated amperage.

Short‑Circuit Protection – Interrupts fault currents quickly to protect wiring and devices.

Thermal‑Magnetic Trip Mechanism – Combines thermal overload response with magnetic short‑circuit response for reliable protection.

DIN‑Rail Mountable – Standard 35 mm DIN‑rail installation for distribution boards.

Easy Manual ON/OFF – Simple toggle operation for isolation and reset after faults.

Mora 2P 63A MTS Dual Power Manual Transfer Isolating Switch Interlock Circuit Breaker Type ChangeOver

Mora 2P 63A MTS Dual Power Manual Transfer Isolating Switch Interlock Circuit Breaker Type ChangeOver

Mora 2P 63A MTS Features

Dual‑Power Manual Transfer Switch – Easily switch between two AC power sources (e.g., grid and backup generator).

63 A Rated Current – Supports moderate load circuits and distribution.

2‑Pole Design – Isolates both live and neutral for safer switching and maintenance.

Built‑In Circuit Breaker Protection – Combines changeover switch and overload/short‑circuit protection in one device.

Mechanical Interlock – Prevents both power sources from being connected at the same time.

Manual ON/OFF Control – Simple and intuitive operation without automation.

Compact & Durable Construction – Reliable performance in electrical panels.

DIN‑Rail / Panel Mountable – Fits standard electrical distribution boards.

Enhanced Safety – Safe isolation of circuits during source changeover.

Ideal for Backup Systems – Perfect for homes, offices, workspaces with grid + generator/inverter setups.

Mora 2P DC Circuit Breaker 125A (Battery Breaker)

Mora 2P DC Circuit Breaker 125A (Battery Breaker)

Mora 2P DC 125A Breaker Features

2‑Pole DC Protection – Safely disconnects both positive and negative DC lines.

High Current Rating – Supports up to 125 A for batteries and DC circuits.

Overload & Short-Circuit Protection – Guards batteries, inverters, and wiring from faults.

Manual Switching – Can be used as a manual disconnect during maintenance.

Compact & Durable Design – Space-saving and robust for long-term use.

DIN‑Rail or Panel Mountable – Easy installation in battery and DC distribution setups.

Ideal for Solar & Battery Systems – Protects PV arrays, battery banks, and DC equipment.

Mora 2P AC MCB Circuit Breaker C Type

Mora 2P AC MCB Circuit Breaker C Type

Mora 2P AC MCB Breaker Features

2‑Pole Protection – Simultaneously breaks live and neutral in single‑phase AC circuits for enhanced safety.

C‑Type Tripping Curve – Ideal for general branch circuits and mixed loads, offering good sensitivity to short‑circuit faults while tolerating moderate inrush currents.

Overload Protection – Trips when current exceeds the rated value to protect wiring and devices from overheating.

Short‑Circuit Protection – Quickly interrupts dangerous fault currents to prevent damage to electrical installations.

Standard AC Voltage Rating – Designed for 230 V / 400 V AC single‑phase and light three‑phase distribution systems.

Manual Operation – Easy ON/OFF switching for load isolation during maintenance or testing.

Reliable Thermal‑Magnetic Trip Unit – Combines thermal overload and magnetic short‑circuit tripping for robust protection.

Mora 2P DC 1000V Solar Mini Circuit Breaker

Mora 2P DC 1000V Solar Mini Circuit Breaker

Mora 2P DC 1000V Solar Mini Circuit Breaker

High DC Voltage Rating – Designed for up to 1000 V DC, making it suitable for solar PV systems and other high-voltage DC applications.

2-Pole Protection – Breaks both positive and negative DC lines simultaneously for safe disconnection.

Overload & Short-Circuit Protection – Protects solar panels, inverters, batteries, and wiring from overcurrents and short circuits.

Manual Switch Function – Can also be used as a manual disconnect switch for DC line isolation during maintenance.

Wide Application Range – Ideal for solar power systems, battery storage, DC circuits, and communication DC applications.

Enhanced Safety in DC – Specifically engineered for DC breaking characteristics (which don’t self-interrupt arcs like AC), supporting safe fault interruption in PV strings.

Mora 80A VA Protector By MORA Bulgaria With Time Delay Function

Mora 80A VA Protector By MORA Bulgaria With Time Delay Function

Mora 80A VA Protector Features

High Voltage Protection – Disconnects power when voltage rises above safe limits to prevent damage to appliances and equipment.

Low Voltage Protection – Cuts the supply if voltage falls below a safe threshold, protecting devices from under voltage stress and malfunction.

Overcurrent Protection – Guards against excessive current flow when load exceeds the rated 80 A capacity.

Time Delay Function – Includes a delay before reconnecting power after a fault, preventing rapid on/off cycles and protecting sensitive electronics.

Real-Time Ampere Monitoring – Shows current draw once load exceeds 1 A, aiding in load tracking and safety.

Durable & Reliable Build – Designed for long-term use in residential and commercial electrical installations

TOMZN 4P AC Single Phase Dual Power Automatic Transfer Switch ATS-TOQ7-125A/100A/63A-4

TOMZN 4P AC Single Phase Dual Power Automatic Transfer Switch ATS-TOQ7-125A/100A/63A-4

TOMZN 4P AC ATS Features

Automatic Dual-Power Switching – Seamlessly transfers electrical load between two power sources (e.g., grid and backup generator/inverter) for continuous power without user action.

Fast Switching Time – Quickly changes over in less than 50 ms, minimizing disruption to connected equipment.

4-Pole 3-Phase Design – Handles all three phases plus neutral, ensuring balanced and complete switching for three-phase systems.

Multiple Current Ratings (63A/100A/125A) – Available in different rated current options to suit a range of load requirements.

High Surge Withstand (8 kV) – Built-in impulse withstand protects against transient voltage spikes during switching events.

PC-Level Reliability Construction – Designed for stable automatic switching without generating dangerous short-circuit currents, protecting circuits and appliances.

Wide Operating Range – Works reliably within ≈85 % to 110 % of rated voltage, accommodating minor voltage variations in supply.

DIN-Rail Mountable – Standard DIN-rail installation makes it easy to mount in electrical panels and distribution boards.

Durable Mechanical & Electrical Life – Built to last thousands of automatic switching cycles for long-term use.

TOMZN 3P AC Single Phase Dual Power Automatic Transfer Switch ATS-TOQ7-125A/100A/63A-3

TOMZN 3P AC Single Phase Dual Power Automatic Transfer Switch ATS-TOQ7-125A/100A/63A-3

TOMZN 3P AC ATS Features

Automatic Dual-Power Switching – Automatically transfers load between two AC power sources (e.g., grid and backup/inverter) without manual intervention, ensuring uninterrupted power when one source fails.

3-Phase Compatibility (3P) – Designed for three-phase systems (uses a 3-pole or 4-pole configuration for loads requiring three phases), adaptable for 63 A, 100 A, or 125 A rated currents.

Fast Switching (< 50 ms) – Quickly switches sources in less than 50 milliseconds, minimizing power interruption to connected equipment.

PC-Level Reliability – Built to PC (Programmable Controller) level standards for dependable automatic switching and protection of appliances and circuits.

Surge Withstand Voltage (8 kV) – High impulse voltage resistance helps protect the ATS and connected loads from voltage spikes (e.g., lightning or transient surges).

Wide Voltage Operating Range – Works reliably within approx 85 %–110 % of rated supply voltage, adapting to minor grid or generator fluctuations.

Automatic & Stable Operation – Detects supply failures and switches without user action, providing stable and continuous power for three-phase electrical equipment.

DIN-Rail Mountable – Standard DIN rail design for easy installation in distribution panels and electrical enclosures.

Durable Mechanical and Electrical Life – Designed for repeated automatic switching with long mechanical and electrical cycle life (typically thousands of operations).

TOMZN 2P AC Single Phase Dual Power Automatic Transfer Switch ATS-TOQ7-125A/100A/63A-2

TOMZN 2P AC Single Phase Dual Power Automatic Transfer Switch ATS-TOQ7-125A/100A/63A-2

TOMZN 2P AC ATS Features

Automatic Dual‑Power Switching – Automatically transfers load between main power and backup (generator/solar) when voltage drops or mains fail.

Supports Multiple Current Ratings – Available in 63 A, 100 A, and 125 A versions to match different load requirements.

2‑Pole Single‑Phase Design – Switches line and neutral for 220 V – 230 V AC single‑phase systems.

Fast Switching Time – Near‑instant transfer between power sources (typically < 50 ms) to minimize disruption to loads.

Auto & Manual Modes – Can operate automatically on power loss or be set to manual mode for controlled switching.

High Surge Withstand – Built‑in impulse voltage resistance (≈ 8 kV) offers protection against transient spikes.

DIN‑Rail Mountable – Compact design installs easily on standard 35 mm DIN rails in distribution panels.

Durable Construction – Made with flame‑retardant, impact‑resistant materials for long‑term reliability.

LED / Status Indicators – Visual indicators (depending on model) show active power source and switch status.

TOMZN 1P 63A ChangeOver Switch Breaker-TO119G

TOMZN 1P 63A ChangeOver Switch Breaker-TO119G

TOMZN 1P 63A ChangeOver Breaker Features

Manual Transfer Switch (MTS) – Lets you manually switch between two AC power sources (e.g., grid and generator) for continuous power supply.

63 A Rated Current – Supports up to 63 amps load, suitable for residential and light commercial circuits.

1‑Pole Configuration – Switches a single circuit line (live) for simple single‑phase power control.

Circuit Breaker + Transfer Switch Combo – Combines breaker protection with manual power switching in one unit.

Mechanical Interlock – Prevents both power sources from being connected at the same time, reducing risk of short circuits and back feeding.

Flame‑Retardant Plastic Housing – Made with high‑temperature resistant insulation for safety and durability.

Easy DIN‑Rail Mounting – Designed for standard 35 mm DIN‑rail installation in electrical panels.

Compact & Simple Operation – Small, user‑friendly design makes it easy to install and operate in tight spaces.

Reliable Backup Control – Ideal for switching between main and alternate power sources during outages or maintenance.

TOMZN 4P 63A 3Phase ChangeOver Switch Breaker-TO419G

TOMZN 4P 63A 3Phase ChangeOver Switch Breaker-TO419G

TOMZN 4P 63A ChangeOver Breaker Features

4‑Pole Manual Changeover Switch – Designed for three‑phase systems (L1, L2, L3 + N), allowing safe switching between two AC power sources (e.g., main grid and backup).

63 A Rated Current – Suitable for moderate‑to‑heavy loads in residential, commercial, or industrial three‑phase installations.

Manual Transfer Switch Function (MTS) – Lets you manually switch power sources to maintain continuity when the primary supply fails.

Interlock Mechanism – Prevents simultaneous connection of both power sources, reducing the risk of short circuits and equipment damage.

DIN‑Rail Mountable – Standard 35 mm DIN‑rail installation for easy integration into electrical panels and distribution boards.

Flame‑Retardant Durable Build – Made of high‑quality insulating plastic for safety and reliability.

Compact & Robust Design – Space‑efficient construction suitable for crowded control enclosures.

Seamless Power Management – Helps manage dual power supply systems (e.g., grid & generator) where uninterrupted power is needed

TOMZN 2P 63A ChangeOver Switch Breaker-TO219G

TOMZN 2P 63A ChangeOver Switch Breaker-TO219G

TOMZN 2P 63A ChangeOver Breaker Features

Dual‑Function Design: Acts as both a circuit breaker and a manual changeover/transfer switch to safely switch between two AC power sources (e.g., grid and generator).

63 A Rated Current: Supports loads up to 63 amps, suitable for larger circuits and subpanels.

2‑Pole Configuration: Provides simultaneous switching and isolation of live and neutral lines for safer operation.

Manual Operation: Simple hand‑operated transfer between main and backup power — no automation.

Integrated Isolation Feature: Includes a mechanical isolating function for safer maintenance and prevention of back‑feed.

Robust Construction: Made with flame‑retardant plastic and durable materials for reliability in industrial, commercial, and residential installations.

DIN‑Rail Mountable: Compact design for easy installation on a 35 mm DIN rail in distribution panels or electrical enclosures.

AC Voltage Compatibility: Typically used with standard 230 V–400 V AC systems at 50/60 Hz.

TOMZN 4 Pole 3Phase Adjustable Over And Under Voltage Protector-TOVPD3-VA

TOMZN 4 Pole 3Phase Adjustable Over And Under Voltage Protector-TOVPD3-VA

TOMZN 4 Pole 3Phase Voltage Protector Features

Adjustable Over‑Voltage Protection — Cuts power when phase voltage exceeds the set safe level to protect equipment from high‑voltage damage.

Adjustable Under‑Voltage Protection — Disconnects supply if phase voltage drops below the set threshold to avoid brown‑out damage.

Over‑Current Protection — Protects circuits from over‑current conditions with adjustable current limits.

Three‑Phase Balance & Asymmetry Protection — Detects phase imbalance (asymmetry) and trips to prevent damage to motors and other loads.

Phase Sequence Protection — Ensures correct phase order and prevents reversal faults that can damage three‑phase equipment.

Adjustable Timing Controls — Active time, reconnect delay, and power‑on delay are adjustable to fine‑tune protection response.

Manual Voltage & Current Calibration — Allows precise calibration of measurement ranges to match specific system requirements.

DIN‑Rail Mountable Design — Standard 35 mm DIN‑rail installation for easy panel mounting.

Wide Use Cases — Suitable for industrial, commercial, and residential three‑phase systems to protect motors, compressors, HVAC units, and other loads.