Showing 1–24 of 33 results
LiFePO₄ (Lithium Iron Phosphate) chemistry — safe, thermally stable, and long-lasting compared with traditional lead-acid batteries.
Nominal Capacity: 100 Ah at 25.6 V, equating to ~2.56 kWh of usable energy.
Depth of Discharge (DOD): High usable energy with ~90–95 % DOD for efficient daily use.
1.3C Discharge Rate: Supports higher discharge for powering multiple loads without strain.
Recommended/Max Currents: Typically ~50 A recommended charge/discharge with peaks up to ~130 A for short bursts (≈30 min).
Fast Charge Capability: Can handle up to ~75 A charge current for efficient recharging.
Parallel Expansion: Up to 16 DL2.5 units can be connected in parallel, scaling total storage from ~2.56 kWh up to ~40.96 kWh for larger systems.
Flexible Installation: Compact design supports wall-mounted or floor-standing setups.
Integrated BMS: Protects against over-charge, over-discharge, over-current, abnormal temperature, and short circuits.
Cell Balancing: Automatic balancing for enhanced performance and longer battery life.
Communication Options: CAN / RS485 and optional Wi-Fi monitoring for integration with inverters and energy management systems.
Long Cycle Life: Rated for ≥6000 cycles, translating to many years of reliable operation.
Safe Operation Range: Operates across wide ambient temps — charging 0 °C to +55 °C and discharging −20 °C to +55 °C.
IP20 Protection: Indoor-rated design suitable for typical residential or small commercial installations.
Compact Dimensions: ~481 × 221 × 133 mm — compact footprint for easier placement.
Weight: ~23 kg — relatively lightweight for its capacity and easy to handle.
Efficient Space Use: Reduced volume compared with older battery tech, making installation simpler.
✔ Residential solar energy storage — stores excess solar generation for nighttime or backup use.
✔ Backup power systems — keeps essential circuits running during outages.
✔ Off-grid or hybrid applications — pairs with inverters for off-grid energy independence.
✔ Scalable energy systems — grow your battery bank by adding more DL2.5 units.
5.12 kWh Nominal Energy — provides substantial energy storage per unit (51.2 V × 100 Ah).
LiFePO₄ Chemistry — safe, stable, and long‑lasting battery cells with superior thermal and chemical stability.
Long Cycle Life: Rated for ≥ 6000+ cycles, meaning many years of dependable performance.
1C Max Discharge Rate: Supports strong power output for various loads.
Recommended Charge/Discharge Current: ~50 A — balanced for everyday energy storage use.
Max Continuous Charge/Discharge: 75 A charge / 100 A discharge, with short peak current up to 110 A (approx. 15 s).
90 % Depth of Discharge (DoD): High usable capacity with minimal energy wasted.
Parallel Expandability: Up to 50 units can be connected in parallel, allowing total system capacity up to ~256 kWh.
Flexible Installation: Designed for wall‑mount, floor‑standing, or stacked installation — adaptable to space constraints and system layout.
Smart BMS (Battery Management System): Built‑in protections for over‑charge, over‑discharge, over‑current, temperature & short‑circuit safety.
Communication Protocols: Supports CAN, RS485, RS232 interfaces for system integration and monitoring.
Optional App/Remote Monitoring: Optional Wi‑Fi/APP monitoring and remote firmware upgrade support available.
Wide Inverter Compatibility: Works with major inverter brands (e.g., SMA, Victron, Solis, GoodWe, Growatt, DEYE, etc.).
Certified & Safe: Designed to meet safety standards like UN38.3, CE‑EMC, IEC62619, ensuring compliance and reliability.
Protection Level: IP20 indoor rating for safe residential installation.
Operating Temperature Range: Designed to handle a broad range of temps, with optional heating function for cold environments.
Reliable Backup Power: Keeps essential circuits running during grid outages.
Solar Energy Storage: Efficient storage of excess PV generation for use at night or during low‑sun periods.
Energy Independence: Modular expansion lets homeowners grow storage capacity over time.
5.12 kWh Nominal Capacity: Provides substantial energy storage for homes and small commercial systems.
LiFePO₄ Battery Chemistry: Uses safe and stable lithium iron phosphate cells for long life and reliability.
100 Ah at 51.2 V Nominal: Balanced capacity and voltage for 48 V solar- and inverter-based systems.
1C Discharge Capability: Supports steady load powering and reliable energy delivery during outages.
Up to 50 Units in Parallel: Scale from a single 5.12 kWh to high-capacity systems (up to ~256 kWh or more) as needs grow.
Modular Installation: Easily expand or tailor capacity for residential and commercial applications.
Wall or Floor Mount: Supports both mounting options with a compact, space-saving footprint.
Wide Compatibility: Works with leading hybrid and solar inverters from brands like SMA, Victron, Solis, GoodWe, Deye, LuxPower, and more (varies by region and firmware/version).
Standard Communication: CAN / RS485 interfaces for inverter integration and system communication.
Real-Time System Monitoring: Built-in support for Wi-Fi/OTA enables remote monitoring and firmware updates (optional or included depending on region).
Smart BMS Protection: Provides multiple safeguards including over-charge, over-discharge, over-temperature, over-current, and short-circuit protections for safe, long-term operation.
≥6000 Life Cycles: Designed for extended service life even under frequent charge/discharge cycles.
Wide Operating Temperature: Typically operates across a broad temperature range (e.g., −20 °C to 55 °C) — often with optional self-heating for cold environments.
Optional Fire Suppression: Can include an intelligent fire extinguishing system capable of detecting and extinguishing a fire in ~5 s (optional accessory in some configurations).
IP20 Indoor Protection: Suitable for indoor installation, protected against dust and physical contact hazards.
Solar Energy Storage: Stores excess PV generation for night or cloudy days.
Backup Power: Keeps essentials running during utility outages.
Hybrid & Off-Grid Systems: Works with hybrid inverters for energy optimization and load shifting.
Expandable Storage Solutions: Easily scalable for larger energy systems by adding more units in parallel.
Large Built‑in Capacity: ~10.24 kWh nominal energy per unit — suitable for household loads, backup power, and solar energy storage.
LiFePO₄ Battery Chemistry: Uses safe, stable lithium iron phosphate cells for long life and enhanced safety.
Parallel Expansion: Supports up to 50 units in parallel, enabling energy systems from ~10.24 kWh up to ~512 kWh (or more depending on configuration) for larger homes or commercial systems.
Modular Design: Flexibly adjust capacity by adding additional PowerBox G2 modules as energy needs grow.
1C Charge & Discharge Rate: Delivers strong power output with max discharge power ~10.24 kW and continuous current ~200 A.
High Peak Current: Can support peak discharge current up to ~300 A (2 min) for handling surge loads.
High Depth of Discharge: ~95 % DOD helps maximise usable energy from each cycle.
Built‑in Fire Protection: Active aerosol fire‑suppression system responds in ~5 seconds upon detecting abnormal heat or fire conditions.
Wide Operating Temperature: Operates reliably from ~–20 °C to +55 °C and supports optional self‑heating for cold climates.
Long Lifespan: LFP cells deliver ≥ 8000 cycles and ~10 years warranty with reliable performance over time.
Smart & Convenient
Integrated BMS: Intelligent Battery Management System protects against over‑charge, over‑discharge, over‑current and temperature extremes.
Built‑in Wi‑Fi & App Control: Smart monitoring and remote control with OTA firmware updates for easy system management (region dependent).
Communication Interfaces: Supports CAN/RS485 for seamless integration with hybrid or off‑grid inverters.
IP65 / IP66 Protection: High weatherproof rating makes the unit suitable for indoor or outdoor installation.
Slim & Space‑Saving Design: Reduced weight and volume (≈30 % smaller / 15 % lighter than predecessors) allow easier wall‑mount or floor installation.
Quiet Operation: Suitable near living spaces with minimal noise during use.
Home backup power during outages.
Solar energy storage to maximise self‑consumption and reduce bills.
Hybrid or off‑grid installations with inverter compatibility.
Commercial or large‑capacity energy systems when multiple units are paralleled.
Large Capacity: Nominal energy of ~14.336 kWh with a 51.2 V / 280 Ah LiFePO₄ battery — ideal for significant residential or commercial storage needs.
Advanced LiFePO₄ Chemistry: Stable and safe Lithium Iron Phosphate (LiFePO₄) cells offer superior thermal stability, safety, and longer life compared to traditional lead-acid batteries.
High Depth of Discharge: Up to 95 % usable capacity — lets you use most of the battery’s stored energy without damaging cells.
Long Cycle Life: Designed for ~8000+ cycles (~10 years) of operation, meaning years of reliable service with high efficiency.
Strong Charge/Discharge Currents:
• Recommended charge/discharge current ~140 A (0.5C)
• Max charge current ~200 A
• Max discharge current ~200 A
These high currents support powering large inverter loads in backup or off-grid systems.
Continuous Discharge Power: Capable of supporting up to ~10 kW of continuous discharge in some configurations.
Integrated Battery Management System (BMS): Provides protections against over-charge, over-discharge, over-current, over-temperature, and short circuits for safer long-term use.
Communication Interfaces: CAN and RS485 communication protocols enable easy connection to inverters and monitoring systems.
Built-in Wi-Fi Module: Some models include Wi-Fi for live system monitoring and OTA firmware updates via mobile apps.
Parallel Expansion: Supports up to 50 modules in parallel, letting you scale capacity from ~14.3 kWh up to ~716.8 kWh for larger systems without a hub.
Ideal for residential storage, off-grid systems, commercial energy backup, or hybrid solar installations.
Safety Certifications: Meets global safety standards including UN38.3, CE, and IEC62619.
Optional Fire Protection System: Some versions support an aerosol fire extinguishing module for enhanced protection in harsh environments.
Protection Rating: Typically IP20 for indoor battery installations.
Robust, Compact Build: Designed for floor-standing residential energy storage.
Easy Installation: Smaller footprint and lighter weight profile compared to older battery designs make installation easier.
Wide Operating Temperature: Operates from 0 °C to 55 °C for charging and –20 °C to 55 °C for discharging, accommodating various climates.
Solar hybrid systems (on-grid/off-grid) with compatible inverters (e.g., SMA, Victron, Solis, GoodWe, Deye, Growatt).
Home backup power during outages.
Commercial energy storage and demand shifting.
Scalable energy solutions where future expansion is needed.
High Capacity: 12.8 V, 100 Ah nominal capacity with 1280 Wh energy storage — provides reliable 12 V power for a wide range of DC loads.
Deep-Cycle LiFePO₄ Cells: Uses LFP battery chemistry for safer operation, long life, and stable performance.
Long Cycle Life: Rated for ~6000+ cycles at 80 % depth of discharge, far exceeding traditional lead-acid batteries.
Lightweight & Compact: Significantly lighter and smaller than equivalent lead-acid batteries, making it easier to carry and install.
Continuous Output: Up to 1280 W continuous power suitable for various DC appliances and inverters.
Battery Management System (BMS): 100 A X-Guard BMS with advanced protection against over-charge, over-discharge, over-temperature, short-circuit, and over-current — ensuring safe, reliable operation.
Peak Discharge: Capable of higher surge currents (e.g., up to ~300 A for short durations — depending on regional spec), useful for motor starts or transient loads.
Expandable Configuration: Can be connected in series or parallel (e.g., 4P4S or 2S8P) to boost capacity and voltage for larger systems.
Versatile Charging: Compatible with solar panels, generators, or grid power — full recharge can take as little as ~2 hours, far faster than lead-acid.
Recommended Charge Current: Around 50 A for efficient and safe charging, with max continuous charge current up to 100 A.
Wide Operating Temps: Performs reliably in temperature ranges from roughly -14 °F to 131 °F (-10 °C to 55 °C) for discharge.
IP65 Protection: Rugged, water- and dust-resistant casing suitable for outdoor and mobile use.
Fire-Retardant Shell: Meets stringent safety standards with a self-extinguishing casing to reduce fire risk.
UL & IEC Certifications: Certified to industry safety standards (e.g., IEC62619, UL1973, CE, FCC, RoHS, UN38.3), ensuring quality and reliability.
Standard Terminal Type: Uses sturdy M8 bolts for secure connections.
Portable Size & Weight: Compact footprint (≈11.4 × 6.9 × 8.7 in) and lightweight (~26.7 lb / ~12.1 kg) make it easy to install in tight spaces — e.g., RVs, boats, solar setups.
Slot-In Replacement: Can replace Group 27–31 lead-acid batteries in many applications.
Good For: RV and camper power systems, solar battery banks, boating and trolling motors, off-grid workshops, emergency backup, DC appliances, and more — with durability and safety suitable for demanding conditions.
CNC 2P AC MCB Circuit Breaker YCB7-63N 
TOMZN 1P 63A ChangeOver Switch Breaker-TO119G 
EcoFlow DELTA Pro 3 Portable Power Station 