2‑Pole DC Protection – Safely disconnects both positive and negative DC lines.
High Current Rating – Supports up to 125 A for batteries and DC circuits.
Overload & Short-Circuit Protection – Guards batteries, inverters, and wiring from faults.
Manual Switching – Can be used as a manual disconnect during maintenance.
Compact & Durable Design – Space-saving and robust for long-term use.
DIN‑Rail or Panel Mountable – Easy installation in battery and DC distribution setups.
Ideal for Solar & Battery Systems – Protects PV arrays, battery banks, and DC equipment.
₨ 1,850 ₨ 2,499
The Mora 2P DC 125A Circuit Breaker is reliable DC protection device designed for battery systems, solar PV setups, and high-current DC circuits. Rated for up to 125 A, it safeguards both positive and negative lines simultaneously, providing overload and short-circuit protection to prevent damage to batteries, inverters, and wiring. Featuring a manual ON/OFF switch, it also serves as a convenient disconnect during maintenance or system servicing. With a compact, durable design suitable for DIN-rail or panel mounting, this breaker ensures safe and efficient operation in residential, commercial, and renewable energy DC applications, making it an essential component for battery and PV system safety.
| Specification | Details |
|---|---|
| Model / Type | Mora 2P DC Circuit Breaker 125A (Battery Breaker) |
| Pole Configuration | 2 P (Positive + Negative DC) – breaks both DC lines |
| Rated Current | 125 A |
| Rated Voltage | Up to 1000 V DC (typical for DC power/battery systems) |
| Protection | Overload protection, Short‑circuit protection |
| Operation | Manual ON/OFF switch (can act as disconnect/isolation) |
| Mounting | DIN‑Rail / Panel mountable |
| Application | Solar PV battery circuits, DC power distribution, battery backup protection |
| Breaking Capacity | High DC fault interruption rating (suitable for battery/DC) |
| Design | Compact & durable housing for long service life |
| Use Case | Protects batteries, inverters, DC wiring, and loads from DC faults |
| Environmental | Designed for typical indoor electrical panel installation |
10-in-1 Smart Protection & Monitoring – Monitors voltage, current, leakage current, total kWh (energy) and protects your circuit.
WiFi Connectivity & App Control – Connects to your home Wi-Fi (2.4 GHz) and lets you remote ON/OFF control, monitor and adjust settings from the Smart Life / TUYA app on iOS/Android.
Adjustable Protection Settings – Set thresholds for over-voltage, under-voltage, over-current, and leakage current via the app or manually.
Voltage & Current Monitoring – Real-time display and tracking of line voltage and current in the app.
Leakage Current Protection – Detects leakage and cuts power to enhance electrical safety.
Energy Consumption Tracking – Shows total kWh usage so you can monitor and manage power consumption.
Scheduled Control & Timer – Create schedules to automate ON/OFF times for your circuits via the app.
Automatic Reconnection with Delay – After a fault trip, it can reconnect automatically with an adjustable delay (1 s to 500 s).
Calibration Feature – Allows calibration for voltage, current, and kW readings for better accuracy.
Voice Assistant Compatible – Works with Google Assistant / Alexa for hands-free control (where supported).
DIN-Rail Mountable – Standard design for installation in electrical panels.
3P + 3P Dual Power Manual Transfer Switch (MTS) – Lets you manually switch between two three-phase AC power sources (e.g., grid and generator/backup), ensuring continuous supply when one source fails.
Integrated Circuit Breaker (MCB) Protection – Combines transfer switch functionality with overload, short-circuit, under-voltage, and phase-loss protection in one unit for safer operation.
Three-Phase Compatibility (3P + 3P) – Designed for balanced switching of all three phases between two input sources, suitable for industrial, commercial, and large-load three-phase systems.
Wide Voltage & Frequency Support – Compatible with 230 V / 400 V AC and works on both 50 Hz and 60 Hz networks.
Manual Operation – User-controlled changeover without automation, giving direct control over which source is supplying power.
Wide Current Range – Available in various current ratings (e.g., 6 A up to 63 A), allowing selection based on load requirements.
High Breaking Capacity (~6 kA) – Built to safely interrupt fault currents and protect the circuit during overloads and short-circuit events.
DIN-Rail Mountable Design – Easy installation in electrical panels and distribution boards with standard DIN-rail mounting.
2-Pole DC Surge Protection – Designed to protect DC power systems (e.g., solar PV strings and DC distribution) from damaging voltage surges and transient spikes.
High Discharge Capacity (20 kA ~ 40 kA) – Can absorb and divert large surge currents caused by lightning or fast transient overvoltage events, helping safeguard connected equipment.
Rated for Up to 1000 V DC – Suitable for high-voltage DC systems typically used in photovoltaic (solar) installations and other DC circuitry.
Fast Response Time – Activates quickly (in microseconds) to reduce exposure to harmful transient events in the DC network.
Low Residual Voltage – Limits the voltage that passes through to sensitive devices during a surge, minimizing potential damage
Thermal Disconnect Safety – Built-in thermal disconnect devices improve reliability by isolating the unit if internal components overheat.
Visual Status Indicators – Color-coded indicators (e.g., green for normal, red for fault) provide quick feedback on protection status.
DIN-Rail Mountable – Easy installation in DC combiner boxes, PV distribution panels, and electrical cabinets using standard DIN-rail mounting.
Dual Power Manual Transfer Switch (MTS) – Lets you manually switch between two AC power sources (e.g., grid and generator/backup) for safer power management.
2P + 2P Configuration – Designed for two-phase or two-source AC systems, providing protection and switching on both paths.
Integrated MCB Protection – Combines a circuit breaker (MCB) with the transfer switch to offer overload, short-circuit, and under-voltage protection while switching.
Rated Voltage: 230/400 V AC (50 Hz / 60 Hz) – Compatible with standard single-phase and two-phase networks.
Various Current Ratings (6 A to 63 A) – Multiple options to match different load requirements.
Breaking Capacity ~6 kA – Designed to safely interrupt fault currents during protection events.
Manual Operation – Simple mechanical lever/switch for choosing power source by hand without automation.
DIN-Rail Mountable – Easy installation in electrical panels and distribution boards.
Max Power PV12000 IP65 Voltas 8K-H4 Single Phase Hybrid Solar Inverter 
GoodWe 10kw ES-C10 UNIQ IP65 Hybrid Solar Inverter 
TOMZN 1P AC TOB1-63H C Type Mini Circuit Breaker 230/400V
There are no reviews yet.