Subtotal: ₨ 3,799
-13%
Ac/dc Fuses, Solar Accessories
Mora AC 2pole SPD Surge Protection Device (AES-2040) 40kA-385vAC
Mora AC 2pole SPD Features
-
2-Pole AC Surge Protection – Protects both live and neutral against voltage spikes on the AC mains.
-
High Surge Current Capacity – Can safely absorb and divert surge currents up to 40 kA to ground.
-
Nominal Discharge Current 20 kA – Handles frequent transient surges effectively.
-
Fast Response Time (< 25 ns) – Acts quickly to clamp dangerous voltage transients before they reach sensitive equipment.
-
Wide Voltage Compatibility – Rated for 385 V AC operating voltage and up to 415 V continuous.
-
DIN-Rail Mountable – Standard 35 mm DIN-rail installation for easy integration into distribution boards.
-
Robust Operating Range – Works reliably from -40 °C to 85 °C environmental temperature.
-
Heavy-Duty Wiring Support – Supports up to 35 mm² connection lines, suitable for larger conductors.
-
Protects Appliances & Electronics – Ideal for safeguarding household or commercial loads from lightning and switching surges.
₨ 2,599 ₨ 2,999
Mora AC 2pole SPD Surge Protection Device (AES-2040) 40kA-385vAC
The Mora AES-2040 AC 2-Pole 40 kA Surge Protection Device (SPD) is DIN-rail mounted surge protector designed to shield single-phase AC electrical systems from harmful voltage spikes and transient overvoltages caused by lightning strikes, switching events, or grid disturbances. It’s rated for 385 V AC operating voltage with a maximum continuous operating voltage of 415 V AC, and features a high discharge capacity (20 kA nominal, 40 kA peak) to divert surge energy away from sensitive equipment before it can cause damage. With a fast response time (< 25 ns) and broad operating temperature range (-40 °C to +85 °C), this SPD is built for durable, reliable protection in residential, commercial, and industrial distribution panels, helping to extend the life of appliances and electronic devices by preventing surge-related failures.
| Specification | Details |
|---|---|
| Model / Type | Mora AES-2040 AC 2-Pole Surge Protection Device (SPD) |
| Rated Operating Voltage (Un) | 385 V AC — suitable for single-phase AC mains systems |
| Maximum Continuous Operating Voltage (Uc) | 415 V AC — maximum voltage the SPD withstands continuously |
| Nominal Discharge Current (In) | 20 kA (8/20 µs) — typical surge current the unit handles repeatedly |
| Maximum Discharge Current (Imax) | 40 kA (8/20 µs) — peak surge current capacity |
| Response Time | < 25 ns — ultra-fast response to surges |
| Poles / Protection Mode | 2-Pole (L + N) — protects both live and neutral lines |
| Operating Temperature | -40 °C to +85 °C — wide environmental range |
| Maximum Connection Line | 35 mm² (hard or strand wire) |
| Recommended Connection Line | 16 mm² hard / 25 mm² strand wire |
| Mounting | DIN Rail (35 mm) — easy panel installation |
| Typical Application | Surge protection for single-phase AC electrical systems to safeguard appliances and circuits |
Based on 0 reviews
Be the first to review “Mora AC 2pole SPD Surge Protection Device (AES-2040) 40kA-385vAC”
Related products
-
Ac/dc Breakers, Solar Accessories
TOMZN 3P+3P MTS AC Dual Power Circuit Breaker MCB 50HZ/60HZ Change Over
Ac/dc Breakers, Solar AccessoriesTOMZN 3P+3P MTS AC Dual Power Circuit Breaker MCB 50HZ/60HZ Change Over
TOMZN 3P+3P AC MTS Features
-
3P + 3P Dual Power Manual Transfer Switch (MTS) – Lets you manually switch between two three-phase AC power sources (e.g., grid and generator/backup), ensuring continuous supply when one source fails.
-
Integrated Circuit Breaker (MCB) Protection – Combines transfer switch functionality with overload, short-circuit, under-voltage, and phase-loss protection in one unit for safer operation.
-
Three-Phase Compatibility (3P + 3P) – Designed for balanced switching of all three phases between two input sources, suitable for industrial, commercial, and large-load three-phase systems.
-
Wide Voltage & Frequency Support – Compatible with 230 V / 400 V AC and works on both 50 Hz and 60 Hz networks.
-
Manual Operation – User-controlled changeover without automation, giving direct control over which source is supplying power.
-
Wide Current Range – Available in various current ratings (e.g., 6 A up to 63 A), allowing selection based on load requirements.
-
High Breaking Capacity (~6 kA) – Built to safely interrupt fault currents and protect the circuit during overloads and short-circuit events.
-
DIN-Rail Mountable Design – Easy installation in electrical panels and distribution boards with standard DIN-rail mounting.
SKU: n/a -
-
Ac/dc Breakers, Solar Accessories
TOMZN 4 Pole 3Phase Adjustable Over And Under Voltage Protector-TOVPD3-VA
Ac/dc Breakers, Solar AccessoriesTOMZN 4 Pole 3Phase Adjustable Over And Under Voltage Protector-TOVPD3-VA
TOMZN 4 Pole 3Phase Voltage Protector Features
-
Adjustable Over‑Voltage Protection — Cuts power when phase voltage exceeds the set safe level to protect equipment from high‑voltage damage.
-
Adjustable Under‑Voltage Protection — Disconnects supply if phase voltage drops below the set threshold to avoid brown‑out damage.
-
Over‑Current Protection — Protects circuits from over‑current conditions with adjustable current limits.
-
Three‑Phase Balance & Asymmetry Protection — Detects phase imbalance (asymmetry) and trips to prevent damage to motors and other loads.
-
Phase Sequence Protection — Ensures correct phase order and prevents reversal faults that can damage three‑phase equipment.
-
Adjustable Timing Controls — Active time, reconnect delay, and power‑on delay are adjustable to fine‑tune protection response.
-
Manual Voltage & Current Calibration — Allows precise calibration of measurement ranges to match specific system requirements.
-
DIN‑Rail Mountable Design — Standard 35 mm DIN‑rail installation for easy panel mounting.
-
Wide Use Cases — Suitable for industrial, commercial, and residential three‑phase systems to protect motors, compressors, HVAC units, and other loads.
SKU: n/a -
-
Ac/dc Breakers, Solar Accessories
TOMZN WIFI Smart Switch Energy Meter Kwh Metering Monitoring Circuit Breaker-TOB9S-VAP
Ac/dc Breakers, Solar AccessoriesTOMZN WIFI Smart Switch Energy Meter Kwh Metering Monitoring Circuit Breaker-TOB9S-VAP
TOMZN WIFI Smart Switch Circuit Breaker Features
-
WiFi Smart Control — Remotely turn ON/OFF the circuit from your smartphone using the Smart Life / Tuya app.
-
Energy Monitoring (kWh) — Tracks real-time energy usage, including voltage, current, power, and total kWh.
-
Scheduling & Timer Functions — Set schedules, countdowns, and loop timers for automated circuit control.
-
Over/Under Voltage Protection — Protects connected equipment by tripping when voltage goes too high or too low.
-
Over-Current & Over-Power Protection — Trips the breaker if current or power exceeds safe limits.
-
Real-Time Metering — Displays voltage (V), current (A), and active power (W) in the app.
-
Voice Assistant Compatible — Works with Amazon Alexa & Google Assistant for hands-free control.
-
Relay Last Status Memory — Remembers the last ON/OFF state after a power outage.
-
Durable Design — Built with flame-retardant materials and supports DIN-rail installation.
-
Wide Operating Range — Works with AC 90–300 V and supports 2.4 GHz Wi-Fi (not 5 GHz
SKU: n/a -
-
Ac/dc Breakers, Solar Accessories
TOMZN Automatic Voltage current Protector Socket AC 110V 220V-TOSVA-16
Ac/dc Breakers, Solar AccessoriesTOMZN Automatic Voltage current Protector Socket AC 110V 220V-TOSVA-16
TOMZN Automatic Voltage current Protector Socket Features
-
Over-Voltage Protection – Automatically cuts power when the input voltage exceeds a set safe limit.
-
Under-Voltage Protection – Automatically shuts off power if the voltage falls below the configured threshold.
-
Over-Current Protection – Trips the socket if the current exceeds the adjustable limit (1–16 A).
-
Automatic Recovery – Restores power automatically once voltage/current returns to normal after a fault.
-
Real-Time Voltage & Current Display – Built-in digital display shows live voltage and current readings.
-
Adjustable Calibration – Voltage calibration adjustable within ±9.5 % for more accurate readings.
-
Configurable Protection Values – Users can adjust over/under-voltage and over-current trigger levels and delay times.
-
Factory Reset & Fault Inquiry – Easy reset of settings and ability to check fault history with button presses.
-
Wide Voltage Range Compatibility – Works with 90–300 V AC supply, suitable for both 110 V and 220 V environments.
-
Durable Construction & Long Life – Low power consumption (< 2 W) and long mechanical/electrical life (~100,000 operations).
SKU: n/a -
There are no reviews yet.