4‑Pole AC Miniature Circuit Breaker – Provides protection for all three phases plus neutral (3P + N) in AC systems.
C‑Type Trip Curve – Trips reliably on overloads and short circuits, and can handle moderate inrush currents from motors and lighting loads.
Wide Voltage Compatibility: Rated for 230/400 V AC and works with 50 Hz/60 Hz electrical networks.
Multiple Current Ratings Available – Often offered in ratings up to 63 A (and sometimes 16 A, 20 A, 25 A, 32 A, 50 A).
Overload & Short‑Circuit Protection – Automatically disconnects the circuit if current exceeds safe limits.
DIN Rail Mounting – Compact design for easy installation in distribution boards.
Durable Construction – Built with robust materials for reliable performance in residential, commercial, and industrial installations.
₨ 2,250 ₨ 2,500
The TOMZN TOB1‑63H 4‑Pole AC Mini Circuit Breaker is a C‑type protection device designed for 230/400 V AC electrical systems at 50/60 Hz. It provides reliable overload and short‑circuit protection for three‑phase + neutral (4P) circuits in residential, commercial, and industrial installations. Built with a compact, robust flame‑resistant body, this MCB ensures long‑lasting performance and easy DIN‑rail mounting while meeting standard safety requirements for low‑voltage power distribution systems.
| Specification | Details |
|---|---|
| Model | TOB1‑63H 4P |
| Type | 4‑Pole AC Miniature Circuit Breaker (MCB) |
| Pole Configuration | 4P (3P + N) |
| Rated Voltage | 230/400 V AC ~ |
| Frequency | 50 Hz / 60 Hz |
| Current Ratings Available | 16 A, 20 A, 25 A, 32 A, 40 A, 50 A, 63 A |
| Trip Curve | C‑Type (for moderate inrush) |
| Breaking Capacity | 6 kA (typical) |
| Rated Insulation Voltage | 500 V |
| Rated Impulse Withstand Voltage | 6 kV |
| Operating Temperature | -25 °C to +55 °C (approx.) |
| Mounting | DIN Rail (standard 35 mm) |
| Standards Compliance | IEC 60898 |
| Typical Applications | Residences, commercial & industrial AC power protection |
Over-Voltage Protection – Cuts power if voltage exceeds the safe set level.
Under-Voltage Protection – Shuts off supply when voltage drops below the safe limit.
Over-Current Protection – Protects circuits from excessive current draw.
Automatically Recovers – Restores power once voltage/current returns to safe range.
Real-Time Voltage & Current Display – Built-in display shows live voltage and current.
Adjustable Settings – You can set over-voltage, under-voltage, and over-current thresholds.
Memory of Settings – Remembers your set values even after power loss.
DIN-Rail Mountable – Easy installation in distribution panels.
Dual Power Manual Transfer Switch (MTS) – Allows you to manually switch between two AC power sources (e.g., main grid and backup generator).
1P + 1P Configuration – Uses two single-pole modules—one for each power source—ideal for single-phase systems.
Built-in Circuit Breaker (MCB) – Provides overload and short-circuit protection during power source switching.
Safety Interlocking System – Prevents both power sources from being connected at the same time to avoid back-feeding and electrical hazards.
Manual Operation – Simple, user-controlled switching between power supplies without automated control.
Wide Frequency Support: Works with 50 Hz / 60 Hz AC systems.
Single-Phase Compatibility – Best for homes, small businesses, and backup power setups.
4-Pole Surge Protection Device (SPD) – Designed to protect three-phase AC systems plus neutral from voltage surges and transient over voltages.
High Surge Current Handling – Built to absorb surge currents (typically around 20 kA–40 kA depending on rating) to protect equipment from lightning strikes and switching transients.
Designed for Low-Voltage AC Networks – Works with 230/400 V AC at 50/60 Hz, making it suitable for residential, commercial, and light industrial electrical panels.
Fast Response & Low Let-Through Voltage – Quickly clamps and diverts excess surge energy to ground, reducing the risk of damage to sensitive electronics.
DIN-Rail Mountable – Compact, DIN-rail design for easy installation in distribution boards and sub-panels.
Thermal Disconnect Protection – Often includes thermal disconnection mechanisms for added safety if internal components overheat.
Visual Status Indicators – Many models use simple status windows/LEDs (green for normal, red for fault) to show device health and when replacement is needed.
2-Pole DC Circuit Breaker – Designed for direct current (DC) circuits.
High DC Voltage Rating: Supports up to 1000 V DC, ideal for solar and battery systems.
Overload & Short-Circuit Protection: Automatically trips to protect DC circuits from faults.
Multiple Current Ratings: Available in ratings from 6 A up to 63 A for different load needs.
DIN Rail Mounting: Easy installation in standard DC distribution boxes.
Compact Modular Design: Space-efficient and suitable for solar PV combiner boxes and enclosures.
Reliable DC Arc Protection: Built to handle DC arcs and provide safer breaking performance compared to AC breakers in DC systems.
UGREEN Nexode 65W 3-Port PD GaN Fast Charger EU – CD 244 
TOMZN AC SPD 2P House Surge Protector Low-voltage Arrester Device 20KA~40KA 385V-TOV1-C 
There are no reviews yet.