-
×
TOMZN Fuse Set-DC 1100V-TOPV-32x
1 × ₨ 900
Subtotal: ₨ 900
-19%
Ac/dc Fuses, Solar Accessories
TOMZN AC SPD 4P House Surge Protector Low-voltage Arrester Device 20KA~40KA 385V-TOV1-C
TOMZN AC SPD 4P Features
-
4-Pole Surge Protection Device (SPD) – Designed to protect three-phase AC systems plus neutral from voltage surges and transient over voltages.
-
High Surge Current Handling – Built to absorb surge currents (typically around 20 kA–40 kA depending on rating) to protect equipment from lightning strikes and switching transients.
-
Designed for Low-Voltage AC Networks – Works with 230/400 V AC at 50/60 Hz, making it suitable for residential, commercial, and light industrial electrical panels.
-
Fast Response & Low Let-Through Voltage – Quickly clamps and diverts excess surge energy to ground, reducing the risk of damage to sensitive electronics.
-
DIN-Rail Mountable – Compact, DIN-rail design for easy installation in distribution boards and sub-panels.
-
Thermal Disconnect Protection – Often includes thermal disconnection mechanisms for added safety if internal components overheat.
-
Visual Status Indicators – Many models use simple status windows/LEDs (green for normal, red for fault) to show device health and when replacement is needed.
₨ 3,400 ₨ 4,200
TOMZN AC SPD 4P House Surge Protector Low-voltage Arrester Device 20KA~40KA 385V-TOV1-C
The TOMZN AC SPD 4P TOV1-C is a four-pole surge protective device designed for 3-phase AC electrical systems. It protects electrical distribution boards and connected equipment from voltage surges, lightning-induced transients, and instantaneous over-voltage events by diverting excess energy away from sensitive components. Rated for 230/400 V AC at 50/60 Hz and compliant with the IEC/EN 61643-1 surge protection standard, this SPD offers high discharge capacity (typically 20 kA–40 kA on the “C” model) and fast response time to help enhance power quality and equipment reliability. Its compact DIN-rail mountable design, robust build, and visual status indicators make it suitable for residential, commercial, and industrial electrical panels where safeguarding against power spikes is essential.
| Specification | Details |
|---|---|
| Model / Type | TOMZN AC SPD 4P TOV1-C (4-Pole Surge Protective Device) |
| Phase / Poles | Three-Phase 4P (L1, L2, L3 + N) |
| Rated Operational Voltage | 230/400 V AC, 50/60 Hz |
| Nominal Discharge Current (In) | ≈ 20 kA (per phase) typical for “C” variant |
| Maximum Discharge Current (Imax) | 20 kA–40 kA range depending on format |
| Short-Circuit Withstand (Impulse) | Up to 10 kA (8/20 µs) |
| Protection Modes | L-N, L-L, L/N-PE (multi-mode) |
| Standards Compliance | IEC/EN 61643-1 surge protection standard |
| Response Time | Fast — typically < 25 ns |
| Mounting | DIN-Rail (35 mm) installation |
| Status Indication | Visual status indicator (Green/Red) |
| Application | Protects electrical distribution boards, panels, and sensitive equipment from lightning/overvoltage spikes |
Based on 0 reviews
Be the first to review “TOMZN AC SPD 4P House Surge Protector Low-voltage Arrester Device 20KA~40KA 385V-TOV1-C”
Related products
-
Ac/dc Breakers, Solar Accessories
TOMZN 1P AC TOB1-63H C Type Mini Circuit Breaker 230/400V
TOMZN 1P AC MCB Breaker Features
-
Single‑Pole AC Miniature Circuit Breaker (MCB) – Protects a single phase in AC electrical circuits.
-
Rated Voltage: 230/400 V AC at 50/60 Hz — suitable for standard household and industrial AC systems.
-
C‑Type Trip Curve – Trips on moderate overcurrents (≈5–10× rated current), ideal for circuits with moderate inrush like lighting and small motors.
-
Overload & Short‑Circuit Protection – Automatically disconnects the circuit when current exceeds safe limits to prevent wiring or device damage.
-
Multiple Current Ratings Available: Often offered in 2 A, 4 A, 6 A, 10 A, 16 A, 20 A, 32 A, 63 A to match different circuits.
-
Compact, DIN‑Rail Mountable Design – Easy to install in standard distribution boards and electrical panels.
SKU: n/a -
-
Ac/dc Breakers, Solar Accessories
TOMZN 4P+4P MTS DC Dual Power Circuit Breaker For PV System
TOMZN 4P+4P DC MTS Breaker Features
-
Dual Power Manual Transfer Switch (MTS) – Enables manual switching between two independent DC power sources (e.g., solar array and battery bank) in a PV system for reliable power control.
-
4P + 4P Pole Configuration – Provides full isolation of both positive and negative poles for each power path, ensuring greater safety and complete DC disconnection when switching.
-
High DC Voltage & Current Capacity – Typically rated for up to 1000 V DC and 63 A, suitable for a wide range of solar system sizes and off‑grid applications.
-
Built‑in Overload & Short‑Circuit Protection – Integrated MCB function protects DC circuits from overcurrent and short circuits during normal operation.
-
Robust Construction – Made with flame‑retardant, durable materials to withstand PV environmental conditions and long‑term use.
-
Manual Operation with Visual Indicators – Simple hand‑operated transfer and clear on/off indicators help ensure correct switching and safer operation.
-
DIN‑Rail Mountable – Designed for easy installation in DC combiner boxes, distribution panels, or PV system enclosures.
-
Suitable for PV & Off‑Grid Systems – Ideal for solar PV installations, battery backup systems, and other DC power networks requiring safe manual source selection.
SKU: n/a -
-
Ac/dc Breakers, Solar Accessories
TOMZN 2P AC C Type MCB Circuit Breaker-TOB1-63H
TOMZN 2P AC MCB Breaker Features
-
2-Pole AC Circuit Breaker — Protects two lines in an AC electrical circuit.
-
Voltage Rating: Works at 230/400 V AC with 50/60 Hz frequency, suitable for standard power systems.
-
Current Ratings Available: From 6 A up to 63 A — choose based on your load requirement.
-
C-Type Trip Curve: Designed to trip on overloads and short circuits, and handle temporary current spikes (e.g., motors, lights).
-
Overload & Short-Circuit Protection: Automatically disconnects the circuit to prevent electrical damage and hazards.
-
Compact & Durable Design: Lightweight, built with fire-resistant and shock-resistant plastic, and easy to install on a DIN rail.
-
Standards Compliance: Meets international safety standards like IEC 60898 & IEC 60947 for reliable performance.
SKU: n/a -
-
Ac/dc Breakers, Solar Accessories
TOMZN 4P 63A 3Phase ChangeOver Switch Breaker-TO419G
TOMZN 4P 63A ChangeOver Breaker Features
-
4‑Pole Manual Changeover Switch – Designed for three‑phase systems (L1, L2, L3 + N), allowing safe switching between two AC power sources (e.g., main grid and backup).
-
63 A Rated Current – Suitable for moderate‑to‑heavy loads in residential, commercial, or industrial three‑phase installations.
-
Manual Transfer Switch Function (MTS) – Lets you manually switch power sources to maintain continuity when the primary supply fails.
-
Interlock Mechanism – Prevents simultaneous connection of both power sources, reducing the risk of short circuits and equipment damage.
-
DIN‑Rail Mountable – Standard 35 mm DIN‑rail installation for easy integration into electrical panels and distribution boards.
-
Flame‑Retardant Durable Build – Made of high‑quality insulating plastic for safety and reliability.
-
Compact & Robust Design – Space‑efficient construction suitable for crowded control enclosures.
-
Seamless Power Management – Helps manage dual power supply systems (e.g., grid & generator) where uninterrupted power is needed
SKU: n/a -
There are no reviews yet.