Showing 313–336 of 425 results
Max. Efficiency of 98.8%
Offers superior energy conversion performance, minimizing energy losses for higher yields.
Wide Voltage Range & Low Startup Voltage
Enables early startup and longer power generation time during the day, increasing total daily energy output.
3 MPPT Design with Precise MPPT Algorithm
Improves energy harvesting across multiple panel orientations or strings under different environmental conditions.
Low Harmonic Distortion (THDi < 3%)
Produces clean power with minimal impact on grid quality and other sensitive electronic equipment.
Anti-Resonance Technology
Supports system designs of over 6 MW connected in parallel to a single transformer without risk of system instability.
Commercial Site Monitoring Integration
Supports intelligent monitoring, including remote I-V curve scanning for string-level diagnostics and performance verification.
150% DC Overload Capability
Allows up to 150% DC/AC ratio (i.e., 22.5 kW of solar panels on a 15 kW inverter), maximizing energy yield and inverter operation at full capacity.
13A Input Per PV String
Compatible with high-power and high-current solar panels commonly used in commercial installations.
Smart I-V Curve Scanning
Provides intelligent string-level monitoring and fault detection to simplify maintenance and troubleshooting.
Fuse-Free Design
Enhances safety by reducing the risk of fire hazards and lowering maintenance needs.
Type II Surge Protection (DC & AC)
Integrated surge protection ensures safety of the inverter and system components during electrical transients or lightning events.
Fan-less, Natural Convection Cooling
Silent operation and extended lifespan due to absence of mechanical cooling components.
Leakage Current Suppression Technology
Reduces leakage current to improve safety and extend component life.
Integrated Volt-Watt Response Mode
Enables compliance with grid regulations by adjusting output based on voltage levels.
DC Input Reverse Polarity Alarm
Alerts the user in case of incorrect DC cable connection, preventing equipment damage.
Built-in Export Power Manager (EPM)
Allows for precise control over energy exported to the grid, helping meet utility requirements or zero-export scenarios.
High Power Output (20kW)
Delivers 20,000 W of three-phase AC output, ideal for large residential, commercial buildings, or small factories.
Hybrid Functionality
Supports both solar PV and high-voltage battery systems, enabling energy storage, backup power, and peak shaving.
High-Voltage Battery Compatibility
Integrates with high-voltage lithium battery banks (typically 160V–600V), allowing faster charge/discharge, higher efficiency, and better scalability.
Multiple MPPTs for Flexibility
Equipped with 2 to 3 independent MPPT trackers, allowing connection of multiple PV arrays with different orientations or irradiance conditions.
High Conversion Efficiency (Up to 98.5%)
Minimizes power loss during DC/AC conversion, improving system yields.
Wide PV Input Voltage Range
Typically between 200V to 1,000V, supporting long strings and reducing wiring losses.
DC/AC Ratio Support (Up to 150%)
Oversize your PV array up to 30,000 W to maximize inverter output even in less-than-ideal conditions.
Grid-Tied and Off-Grid Support
Seamlessly switches between grid-connected and off-grid modes, offering uninterrupted power to critical loads.
Built-in EMS (Energy Management System)
Enables smart energy routing — prioritize solar self-use, battery charging, or grid feed-in based on programmable logic.
Peak Shaving and Load Shifting
Helps reduce electricity bills by storing excess solar during the day and using it during peak tariff hours.
Intelligent Backup Function
Provides automatic switchover during power outages with rapid response to ensure uninterrupted supply to critical loads.
Export Limitation and Zero Export
Integrated export power manager (EPM) allows precise control of energy sent to the grid, fully supporting zero-export policies.
Advanced Monitoring & Remote Access
Wi-Fi, RS485, CAN, and Ethernet ports with optional cloud platform or app monitoring.
Robust & Weatherproof Design
IP65-rated aluminum housing suitable for outdoor installation with natural or fan-assisted convection.
Comprehensive Protections
Built-in protections for reverse polarity, over/under voltage, overcurrent, surge, islanding, short-circuit, and temperature.
High Efficiency: Achieves a maximum efficiency of 98.7%, ensuring minimal energy loss during DC to AC conversion.
Dual MPPT Design: Features two MPPTs, allowing for flexible PV array configurations and improved energy capture in varying conditions.
Wide MPPT Voltage Range: Operates efficiently within a voltage range of 160V to 1000V, accommodating diverse PV system designs.
Low Startup Voltage: Initiates operation at a low voltage of 180V, enabling earlier energy production during the day.
High DC Overload Capability: Supports up to 150% DC/AC ratio, allowing for a maximum DC input power of 30 kW.
Robust Protection Mechanisms: Equipped with multiple protection features, including DC reverse-polarity protection, insulation resistance monitoring, residual current detection, surge protection, and grid monitoring.
Integrated Export Power Manager (EPM): Allows for effective management of power export to the grid, ensuring compliance with local regulations.
User-Friendly Interface: Comes with an LCD display and supports communication interfaces like RS485, WiFi, and GPRS for real-time monitoring and control.
Durable Design: Built with a transformerless topology and housed in an IP66-rated enclosure, ensuring longevity and resistance to environmental factors.
High Efficiency: Achieves a maximum efficiency of 98.8%, ensuring minimal energy loss during DC to AC conversion.
3 MPPT Design: Features three Maximum Power Point Trackers (MPPTs), allowing for flexible PV array configurations and improved energy capture in varying conditions.
Wide MPPT Voltage Range: Operates efficiently within a voltage range of 200V to 1000V, accommodating diverse PV system designs.
Low Startup Voltage: Initiates operation at a low voltage of 180V, enabling earlier energy production during the day.
High DC Overload Capability: Supports up to 150% DC/AC ratio, allowing for a maximum DC input power of 37.5 kW.
Robust Protection Mechanisms: Equipped with multiple protection features, including DC reverse-polarity protection, insulation resistance monitoring, residual current detection, surge protection, and grid monitoring.
Integrated Export Power Manager (EPM): Allows for effective management of power export to the grid, ensuring compliance with local regulations.
User-Friendly Interface: Comes with an LCD display and supports communication interfaces like RS485, WiFi, and GPRS for real-time monitoring and control.
Durable Design: Built with a transformerless topology and housed in an IP65-rated enclosure, ensuring longevity and resistance to environmental factors.
High Efficiency: Achieves a maximum efficiency of 98.8%, ensuring minimal energy loss during DC to AC conversion.
3 MPPT Design: Features three Maximum Power Point Trackers (MPPTs), allowing for flexible PV array configurations and improved energy capture in varying conditions.
Wide MPPT Voltage Range: Operates efficiently within a voltage range of 200V to 1000V, accommodating diverse PV system designs.
Low Startup Voltage: Initiates operation at a low voltage of 180V, enabling earlier energy production during the day.
High DC Overload Capability: Supports up to 130% DC/AC ratio, allowing for a maximum DC input power of 39 kW.
Robust Protection Mechanisms: Equipped with multiple protection features, including DC reverse-polarity protection, insulation resistance monitoring, residual current detection, surge protection, and grid monitoring.
Integrated Export Power Manager (EPM): Allows for effective management of power export to the grid, ensuring compliance with local regulations.
User-Friendly Interface: Comes with an LCD display and supports communication interfaces like RS485, WiFi, and GPRS for real-time monitoring and control.
Durable Design: Built with a transformerless topology and housed in an IP65-rated enclosure, ensuring longevity and resistance to environmental factors.
High Power Output: Delivers 50,000 W of three-phase AC power, suitable for large commercial installations.
High Voltage Battery Compatibility: Supports high-voltage lithium batteries (160–600 V), allowing for efficient energy storage and discharge.
Multiple MPPTs: Equipped with 4 MPPTs, each supporting up to 20 A input current, enabling flexible and efficient PV array configurations.
Wide PV Input Voltage Range: Operates within a voltage range of 180 V to 1,000 V, accommodating various PV system designs.
High Efficiency: Achieves a maximum efficiency of 97.8%, ensuring optimal energy conversion.
Advanced Energy Management: Features peak shaving control in both “self-use” and “generator” modes, and supports unbalanced and half-wave loads on both grid and backup ports.
Robust Protection Features: Includes Type II surge protection for both DC and AC, integrated DC switch, and AFCI (Arc Fault Circuit Interrupter) for enhanced safety.
Scalability: Supports parallel operation of up to 6 units, allowing for system expansion up to 300 kW.
Rapid UPS Transfer: Offers a UPS transfer time of less than 10 milliseconds, ensuring uninterrupted power supply to critical loads.
Remote Monitoring and Control: Provides real-time battery monitoring, remote firmware upgrades, and battery healing functions to prolong battery life.
High Conversion Efficiency up to 98.7% – Minimizes energy loss for superior performance.
Max. PV Input Power: 66,000W – Supports large-scale solar installations.
Max. DC Voltage: 1100V – Designed for modern high-voltage PV modules and longer string lengths.
Wide MPPT Voltage Range (200V – 1000V) – Enables earlier startup and extended solar harvest periods.
4 MPPTs with 8 PV String Inputs – Allows flexible design across different roof orientations or sub-arrays.
Max. Input Current: 26A per MPPT – Accommodates high-power modules.
Smart Monitoring Support – RS485, Wi-Fi, GPRS options for real-time data access and diagnostics.
Natural Cooling (No Fans) – Enhances longevity with silent operation.
IP65 Weatherproof Enclosure – Safe for outdoor use in challenging conditions.
Anti-Islanding, Surge, Over/Under Voltage Protection – Ensures safe grid interaction.
User-Friendly LCD Display + LED Indicators – Quick access to inverter status and parameters.
Three-Phase Grid Connection (400V AC) – Suitable for industrial and commercial infrastructure.
High Efficiency: Achieves up to 98.7% maximum efficiency, ensuring optimal energy harvest.
6 MPPT Design: Offers flexibility in system design and minimizes power loss due to shading or module mismatch.
Wide MPPT Voltage Range: Operates efficiently within a 200V to 1000V range, with a low start-up voltage of 195V.
High PV Input Capacity: Supports up to 90,000W of PV input power, accommodating large-scale installations.
Robust Protection Features: Includes Type II surge protection for both DC and AC, AFCI (Arc Fault Circuit Interrupter), and DC reverse polarity protection.
Intelligent Monitoring: Features smart I-V curve diagnosis and supports RS485, Wi-Fi, and GPRS communication for real-time monitoring.
Durable Construction: IP66-rated enclosure with C5 anti-corrosion level, suitable for outdoor installations in harsh environments.
Integrated DC Switch: Allows for safe and convenient maintenance operations.
Dual MPPT Inputs: Allows for efficient energy harvesting from PV arrays with different orientations or shading conditions.
High Surge Capability: Provides 200% overload capacity for 10 seconds, accommodating high inrush currents from appliances like air conditioners and refrigerators.
Automatic UPS Switching: Offers a rapid switchover time of less than 4 milliseconds, ensuring seamless transition to backup power during grid outages.
Generator Compatibility: Features an independent generator interface with automatic start/stop control, enhancing system reliability during extended power outages.
Advanced Battery Management: Includes six customizable charge/discharge time settings and integrated battery protection mechanisms to extend battery life and optimize performance.
Smart Grid Integration: Equipped with smart grid features, enabling efficient energy management and participation in grid services.
Robust Design: Built to withstand harsh environmental conditions, ensuring long-term durability and consistent performance.
High Efficiency: Achieves up to 98.7% maximum efficiency, ensuring optimal energy harvest.
9 MPPT Design: Offers flexibility in system design and minimizes power loss due to shading or module mismatch.
Wide MPPT Voltage Range: Operates efficiently within a 180V to 1000V range, with a low start-up voltage of 180V.
High PV Input Capacity: Supports up to 120,000W of PV input power, accommodating large-scale installations.
Robust Protection Features: Includes Type II surge protection for both DC and AC, AFCI (Arc Fault Circuit Interrupter), and DC reverse polarity protection.
Intelligent Monitoring: Features smart I-V curve diagnosis and supports RS485, Wi-Fi, and GPRS communication for real-time monitoring.
Durable Construction: IP66-rated enclosure with C5 anti-corrosion level, suitable for outdoor installations in harsh environments.
Integrated DC Switch: Allows for safe and convenient maintenance operations
High Efficiency: Achieves a maximum efficiency of 96.2%, ensuring optimal energy conversion and minimal losses.
Dual MPPT Inputs: Equipped with two Maximum Power Point Tracking (MPPT) inputs, each supporting up to 32A, allowing for efficient energy harvesting from PV arrays with different orientations or shading conditions.
Battery Compatibility: Supports both lithium-ion and lead-acid batteries, with a maximum charge/discharge current of 190A, providing flexibility in energy storage solutions.
Automatic UPS Switching: Offers a rapid switchover time of less than 4 milliseconds, ensuring seamless transition to backup power during grid outages.
Surge Power Capability: Provides 200% overload capacity for 10 seconds, accommodating high inrush currents from appliances like air conditioners and refrigerators.
Generator Compatibility: Features an independent generator interface with automatic start/stop control, enhancing system reliability during extended power outages.
Flexible Connectivity: Supports both single-phase and three-phase connections, with the ability to scale up to a maximum of 48 kW in parallel, facilitating scalability for larger installations.
Smart Grid Integration: Equipped with smart grid features, enabling efficient energy management and participation in grid services.
Advanced Battery Management: Includes six customizable charge/discharge time settings and integrated battery protection mechanisms to extend battery life and optimize performance.
Robust Design: Built to withstand harsh environmental conditions, with an IP66 protection rating, ensuring long-term durability and consistent performance.
10-in-1 Smart Protection & Monitoring – Monitors voltage, current, leakage current, total kWh (energy) and protects your circuit.
WiFi Connectivity & App Control – Connects to your home Wi-Fi (2.4 GHz) and lets you remote ON/OFF control, monitor and adjust settings from the Smart Life / TUYA app on iOS/Android.
Adjustable Protection Settings – Set thresholds for over-voltage, under-voltage, over-current, and leakage current via the app or manually.
Voltage & Current Monitoring – Real-time display and tracking of line voltage and current in the app.
Leakage Current Protection – Detects leakage and cuts power to enhance electrical safety.
Energy Consumption Tracking – Shows total kWh usage so you can monitor and manage power consumption.
Scheduled Control & Timer – Create schedules to automate ON/OFF times for your circuits via the app.
Automatic Reconnection with Delay – After a fault trip, it can reconnect automatically with an adjustable delay (1 s to 500 s).
Calibration Feature – Allows calibration for voltage, current, and kW readings for better accuracy.
Voice Assistant Compatible – Works with Google Assistant / Alexa for hands-free control (where supported).
DIN-Rail Mountable – Standard design for installation in electrical panels.
Manual Transfer Switch (MTS) – Lets you manually switch between two AC power sources (e.g., grid and generator) for continuous power supply.
63 A Rated Current – Supports up to 63 amps load, suitable for residential and light commercial circuits.
1‑Pole Configuration – Switches a single circuit line (live) for simple single‑phase power control.
Circuit Breaker + Transfer Switch Combo – Combines breaker protection with manual power switching in one unit.
Mechanical Interlock – Prevents both power sources from being connected at the same time, reducing risk of short circuits and back feeding.
Flame‑Retardant Plastic Housing – Made with high‑temperature resistant insulation for safety and durability.
Easy DIN‑Rail Mounting – Designed for standard 35 mm DIN‑rail installation in electrical panels.
Compact & Simple Operation – Small, user‑friendly design makes it easy to install and operate in tight spaces.
Reliable Backup Control – Ideal for switching between main and alternate power sources during outages or maintenance.
Single‑Pole AC Miniature Circuit Breaker (MCB) – Protects a single phase in AC electrical circuits.
Rated Voltage: 230/400 V AC at 50/60 Hz — suitable for standard household and industrial AC systems.
C‑Type Trip Curve – Trips on moderate overcurrents (≈5–10× rated current), ideal for circuits with moderate inrush like lighting and small motors.
Overload & Short‑Circuit Protection – Automatically disconnects the circuit when current exceeds safe limits to prevent wiring or device damage.
Multiple Current Ratings Available: Often offered in 2 A, 4 A, 6 A, 10 A, 16 A, 20 A, 32 A, 63 A to match different circuits.
Compact, DIN‑Rail Mountable Design – Easy to install in standard distribution boards and electrical panels.
Dual Power Manual Transfer Switch (MTS) – Allows you to manually switch between two AC power sources (e.g., main grid and backup generator).
1P + 1P Configuration – Uses two single-pole modules—one for each power source—ideal for single-phase systems.
Built-in Circuit Breaker (MCB) – Provides overload and short-circuit protection during power source switching.
Safety Interlocking System – Prevents both power sources from being connected at the same time to avoid back-feeding and electrical hazards.
Manual Operation – Simple, user-controlled switching between power supplies without automated control.
Wide Frequency Support: Works with 50 Hz / 60 Hz AC systems.
Single-Phase Compatibility – Best for homes, small businesses, and backup power setups.
Over-Voltage Protection – Cuts power if voltage exceeds the safe set level.
Under-Voltage Protection – Shuts off supply when voltage drops below the safe limit.
Over-Current Protection – Protects circuits from excessive current draw.
Automatically Recovers – Restores power once voltage/current returns to safe range.
Real-Time Voltage & Current Display – Built-in display shows live voltage and current.
Adjustable Settings – You can set over-voltage, under-voltage, and over-current thresholds.
Memory of Settings – Remembers your set values even after power loss.
DIN-Rail Mountable – Easy installation in distribution panels.
Dual‑Function Design: Acts as both a circuit breaker and a manual changeover/transfer switch to safely switch between two AC power sources (e.g., grid and generator).
63 A Rated Current: Supports loads up to 63 amps, suitable for larger circuits and subpanels.
2‑Pole Configuration: Provides simultaneous switching and isolation of live and neutral lines for safer operation.
Manual Operation: Simple hand‑operated transfer between main and backup power — no automation.
Integrated Isolation Feature: Includes a mechanical isolating function for safer maintenance and prevention of back‑feed.
Robust Construction: Made with flame‑retardant plastic and durable materials for reliability in industrial, commercial, and residential installations.
DIN‑Rail Mountable: Compact design for easy installation on a 35 mm DIN rail in distribution panels or electrical enclosures.
AC Voltage Compatibility: Typically used with standard 230 V–400 V AC systems at 50/60 Hz.
2-Pole AC Circuit Breaker — Protects two lines in an AC electrical circuit.
Voltage Rating: Works at 230/400 V AC with 50/60 Hz frequency, suitable for standard power systems.
Current Ratings Available: From 6 A up to 63 A — choose based on your load requirement.
C-Type Trip Curve: Designed to trip on overloads and short circuits, and handle temporary current spikes (e.g., motors, lights).
Overload & Short-Circuit Protection: Automatically disconnects the circuit to prevent electrical damage and hazards.
Compact & Durable Design: Lightweight, built with fire-resistant and shock-resistant plastic, and easy to install on a DIN rail.
Standards Compliance: Meets international safety standards like IEC 60898 & IEC 60947 for reliable performance.
Automatic Dual‑Power Switching – Automatically transfers load between main power and backup (generator/solar) when voltage drops or mains fail.
Supports Multiple Current Ratings – Available in 63 A, 100 A, and 125 A versions to match different load requirements.
2‑Pole Single‑Phase Design – Switches line and neutral for 220 V – 230 V AC single‑phase systems.
Fast Switching Time – Near‑instant transfer between power sources (typically < 50 ms) to minimize disruption to loads.
Auto & Manual Modes – Can operate automatically on power loss or be set to manual mode for controlled switching.
High Surge Withstand – Built‑in impulse voltage resistance (≈ 8 kV) offers protection against transient spikes.
DIN‑Rail Mountable – Compact design installs easily on standard 35 mm DIN rails in distribution panels.
Durable Construction – Made with flame‑retardant, impact‑resistant materials for long‑term reliability.
LED / Status Indicators – Visual indicators (depending on model) show active power source and switch status.
2-Pole DC Circuit Breaker – Breaks both positive and negative lines in DC power systems for safer protection.
High DC Voltage Rating – Rated for up to 600 V DC (commonly used in solar PV and battery systems).
High Current Capacity – Available in up to 125 A rating for larger DC loads.
Overload & Short-Circuit Protection – Trips the circuit to prevent damage from excessive current or faults.
Modular DIN Rail Mounting – Easy installation on standard 35 mm DIN rails in DC combiner boxes and panels.
Compact & Durable Design – Built with strong materials for long service life in residential, commercial, and solar DC applications.
C-Type Trip Characteristic – Typical for general DC protection with reliable tripping behavior.
Suitable for Solar PV & Battery Systems – Ideal for protecting DC circuits between solar strings, inverters, and battery banks.
2-Pole DC Circuit Breaker – Designed for direct current (DC) circuits.
High DC Voltage Rating: Supports up to 1000 V DC, ideal for solar and battery systems.
Overload & Short-Circuit Protection: Automatically trips to protect DC circuits from faults.
Multiple Current Ratings: Available in ratings from 6 A up to 63 A for different load needs.
DIN Rail Mounting: Easy installation in standard DC distribution boxes.
Compact Modular Design: Space-efficient and suitable for solar PV combiner boxes and enclosures.
Reliable DC Arc Protection: Built to handle DC arcs and provide safer breaking performance compared to AC breakers in DC systems.
Dual Power Manual Transfer Switch (MTS) – Lets you manually switch between two AC power sources (e.g., grid and generator/backup) for safer power management.
2P + 2P Configuration – Designed for two-phase or two-source AC systems, providing protection and switching on both paths.
Integrated MCB Protection – Combines a circuit breaker (MCB) with the transfer switch to offer overload, short-circuit, and under-voltage protection while switching.
Rated Voltage: 230/400 V AC (50 Hz / 60 Hz) – Compatible with standard single-phase and two-phase networks.
Various Current Ratings (6 A to 63 A) – Multiple options to match different load requirements.
Breaking Capacity ~6 kA – Designed to safely interrupt fault currents during protection events.
Manual Operation – Simple mechanical lever/switch for choosing power source by hand without automation.
DIN-Rail Mountable – Easy installation in electrical panels and distribution boards.
2P + 2P DC Manual Transfer Switch (MTS) – Lets you manually switch between two DC power sources in a photovoltaic (PV) setup, such as a solar array and a backup battery bank.
Dual Power Operation – Designed for DC dual power systems to ensure continuity of power without automatic switching.
Rated for High DC Voltage: Supports up to 1000 V DC, meeting common PV system requirements.
Integrated Circuit Breaker Protection: Combines manual transfer switching with overload and short‑circuit protection in one unit.
2P + 2P Pole Structure: Provides full protection and switching for two separate DC sources (each 2‑pole).
Rated Current Options: Available (commonly) at 63 A and potentially other ratings depending on model.
DIN‑Rail Mountable: Compact design fits standard 35 mm DIN rails in PV combiner boxes and DC distribution panels.
Adjustable Over-Voltage Protection – Cuts off power if voltage rises above your set safe level (e.g., 230–300 V range).
Adjustable Under-Voltage Protection – Disconnects supply when voltage falls below the safe limit (e.g., 140–210 V range).
Adjustable Over-Current Protection – Protects against excessive current with adjustable current range up to 63 A.
Real-Time Monitoring – Built-in voltage meter, ammeter, and energy (kWh) meter for live electrical data.
Delay & Reconnect Settings – Adjustable delay times before protection kicks in and automatic power reconnection after normal conditions return.
Memory of Fault Values – Saves recorded values for over-voltage, under-voltage, and over-current events even after power is off.
LED Indicators – Flashing LEDs show voltage or current protection status when triggered.
DIN-Rail Mountable – Fits easily into electrical panels using a standard DIN rail.
SolarMax Falcon Ultra 6KW Solar Inverter 
SolarMax 25KW On-Grid Solar Inverter (IP-66) 
Solis 12kw Three Phase LV Hybrid Solar Inverter 
TOMZN 2P AC C Type MCB Circuit Breaker-TOB1-63H 
